2 Set the following item.
Item | Contents |
|
|
COUNTRY | Country code |
|
|
ORGANIZATION | Organization code |
|
|
USER | User code |
|
|
To change the currently selected item
Hold down the STOP button, and turn the jog dial or shuttle dial.
To select a different digit to be changed
Turn the jog dial or shuttle dial.
To change the value of a digit
Hold down the SHUTTLE button, and turn the jog dial or shuttle dial.
3 Press the SET button.
About UMID ownership informationCOUNTRY (country code)
Enter an abbreviated alphanumeric string
There are about 240 country codes.
Find your own country code on the following home page.
Refer to
When the country code is less than 4 bytes, the active part of the code will occupy the first part of the
Example: In the case of Japan
For Japan, if the country code is JP, it is 2 bytes, if JPN, it is 3 bytes.
Thus, enter the following: JP_ _
or JPN _
where _ represents a space.
ORGANIZATION (organization code)
Enter an abbreviated
Notes
•Organization codes must be acquired by applying to the SMPTE registration office.
When no organization code has been acquired, it is forbidden to enter an arbitrary string. As a rule, the code
“00” must be entered. Freelance operators who do not belong to an origination should enter “~.”
•There are no problems in recording or playing back
USER (user code)
Enter the
The user code is registered with each organization locally. It is usually not centrally registered.
When the country code is less than 4 bytes, enter the country code from the beginning of the 4 bytes and enter the space character (20h) in the remaining strings.
This user code is determined by the organization. The methods used depend on the organization.
Note
User code cannot be entered when no organization code has been entered.
Menus 7 Chapter