Selection Scene 5 Chapter

2 Use the arrow buttons or the jog dial to select the desired clip.

You can also select clips with the following operations.

Press the PREV or NEXT button: Moves to the previous or next clip.

Press the PREV or NEXT button with the SHIFT button held down: Moves to the first or last clip.

Press the F or f button with the SHIFT button held

down: Switches to the previous or next page. (Does not switch when there is only one page.)

3 With the SHIFT button held down, press the SET button.

The scene selection window appears.

To return to the original screen

Press the RESET button.

4 Press the SET button.

The selected clip is added to the current clip list as a sub clip.

At the same time, the scene selection window closes and you return to the original thumbnail screen.

5 Repeat steps 2 to 4 until you have added all of the desired clips to the current clip list.

You can select the same clip any number of times.

The scene selection window displays thumbnails of the sub clips that have been added to the current clip list. The cursor in the window indicates the position where the next sub clip will be added.

Total duration of sub clips in the current clip list

Cursor (indicates where the next sub clip will be added)

Thumbnails of sub clips already added to the current clip list

To move the cursor in the scene selection window

After carrying out step 3 to display the scene selection window, press the G or g button.

6 When you have finished selecting all the clips you want, save the current clip list to disc.

See 5-2-6 “Saving the Current Clip List to Disc” (page 66).

To select while playing back and searching (quick scene selection)

1 With the SUBCLIP button off, and the clip displayed in full-screen mode, play back the clip or conduct a search to find the point that you want to set as the In point.

To display the desired clip in full-screen mode If the thumbnail screen is displayed, use the arrow buttons or jog dial to select the clip to display in full- screen mode, and then press the SET button.

62 5-2 Creating Clip Lists