“BATT” and “E” flashing: Exhausted (charging required). Operation of the PDW-R1 stops.

eDisc loaded mark

This lights while a disc is loaded in the PDW-R1. It flashes as the disc is inserted, and while it is being ejected.

2Audio and video settings section

1AUDIO INPUT CH button

2AUDIO INPUT SEL button

3 VIDEO INPUT SEL button

AUDIO

VIDEO

 

INPUT CH INPUT SEL INPUT SEL

 

WARNING

KEY INHI

R

aAUDIO INPUT CH (channel) button

This selects the channel to which the audio input signal selection applies.

Each press of this button selects the next audio input channel, in the following order.

CH1 t CH2 t CH3 t CH4

The selected channel appears in the time data display and video panel.

You can use the AUDIO INPUT SEL button to select the audio input signal for the selected channel.

When audio is in eight-channel mode

On channels 5 to 8, you can input only the audio signals embedded in an SDI signal.

bAUDIO INPUT SEL (selection) button

This selects the input signal to the channel selected with the AUDIO INPUT CH button described above.

Each press of this button selects the next audio input signal, and the audio input indications in the time data display and video panel change to reflect this. ANALOG: Analog audio signal input to the AUDIO IN

connector

SDI: SDI audio signal input to the SDI IN connector

AES/EBU: AES/EBU format digital audio signal input to the DIGITAL AUDIO (AES/EBU) IN connector

SG: Audio test signal generated by the internal signal generator

cVIDEO INPUT SEL (selection) button

Pressing this button cycles through the following selections of the video input signal.

• SDI video signal input to the SDI IN connector

• Composite video signal input to the VIDEO IN connector

• Test video signal from the internal signal generator

• i.LINK-compliant DVCAM format digital signal (i.LINK input comprising both video and audio signals) input to the S400 (i.LINK) connector

Signals are selected in the following order. The video input indication in the video panel changes to reflect this.

SDI t COMPOSITE t SG t i.LINK

Note

Input signals (AV/C) from the S400 (i.LINK) connector cannot be recorded when the basic menu item 031 “RECORDING FORMAT” is set to “IMX 50,” “IMX40,” or “IMX 30.” E-E video display and audio output are also not possible.

Select a signal other than “i.LINK” to record IMX format video signals. When i.LINK input signals are selected, set basic menu item 031“RECORDING FORMAT” to “DVCAM.”

See 7-2-2 “Basic Menu Operations” (page 94) for more information about how to make basic menu settings.

3 Display settings section

1 STATUS button

2CHARACTER switch

3 LIGHT switch

4 MONITOR switch

PROCESS

CONTROL

STATUS CHARACTER

LIGHT

MONITOR

REC INHI

OFF ON

OFF ON

OFF L H

 

aSTATUS button

Displays information about the current settings of this unit in the video panel.

The displayed information changes in the following order with each press of the button.

Page 1 t Page 2 t Display off

Items displayed on page 1

Item

Description

 

 

525, 625

Line mode selected with basic menu

 

item 013

 

 

IMX50, IMX40,

Video recording format selected with

IMX30, DVCAM

basic menu item 031

 

 

8ch, 4ch

Number of audio recording channels

 

(When the format is IMX50/40/30, this

 

is the number of channels specified by

 

maintenance menu item “AUDIO

 

CONFIG” - “DATA LENGTH.” When the

 

format is DVCAM, this is always 4ch.)

 

 

VIN

The video input signal selected with the

 

VIDEO INPUT SEL button (setting

 

values: SDI, COMPST, SG, i.LINK)

 

 

AINn (n: channel

The audio input signal selected with the

number 1 to 4)

AUDIO INPUT SEL button (setting

 

values: SDI, AES/EBU, SG, ANALOG)

 

 

Parts of Functions and Names 2 Chapter

2-3 LCD Panel 19