Parts of Functions and Names 2 Chapter

“AUDIO CONFIG”-“NON-AUDIO INPUT” (recording) and extended menu item 823 “NON-AUDIO FLAG PB” (playback).

See 7-3-2 “Extended Menu Operations” (page 108) for more information about how to make extended menu settings.

See 7-4-2 “Maintenance Menu Operations” (page 114) for more information about how to make maintenance menu settings.

5 Time code inputs/outputs

1 TC IN connector

2 TC OUT connector

TC

INOUT

aTC IN connector (BNC type)

This inputs an SMPTE time code generated by an external device.

bTC OUT connector (BNC type)

This outputs the following time code, depending on the operating state of the PDW-R1.

During playback: playback time code

During recording: the time code from the internal time code generator or the time code input to the TC IN connector.

When extended menu item 611 “TC OUTPUT PHASE IN EE MODE” is set to “muting,” no time code is output.

6Power supply section

DC IN

12V

1 DC IN 12V connector

AC IN

2 -AC IN connector

aDC IN (DC power input) 12V connector (XLR type, 4-pin, male)

Connect DC power to this connector.

b-AC IN (AC power input) connector

Connect to an AC power supply, using an optional power cord (see page 133).

24 2-4 Connectors