Menu items in the 700s, relating to video control
Item | Item name |
| Settings | ||
number |
|
|
|
|
|
|
|
| |||
713 | VIDEO SETUP REFERENCE | Select whether to remove the setup (7.5%) from the input analog video | |||
|
|
|
|
| signals and whether to add the setup (7.5%) to the output analog video |
|
| ||||
|
| signals (when 525(U) or 525(J) line mode is selected). | |||
|
|
|
|
| |
|
|
|
|
|
|
| 1 | INPUT LEVEL |
| Whether to remove the setup (7.5%) from the input analog video signals. | |
|
|
|
|
| 0.0%: Do not remove. |
|
|
|
|
| 7.5%: Remove. |
|
|
|
|
| The factory default settings for each line mode are as follows: |
|
|
|
|
| 525(U) line mode: 7.5% |
|
|
|
|
| 525(J) line mode: 0.0% |
|
|
|
| ||
| 2 | OUTPUT LEVEL | Whether to add the setup (7.5%) to the output analog video signals. | ||
|
|
|
|
| 0.0%: Do not add. |
|
|
|
|
| 7.5%: Add. |
|
|
|
|
| The factory default settings for each line mode are as follows: |
|
|
|
|
| 525(U) line mode: 7.5% |
|
|
|
|
| 525(J) line mode: 0.0% |
|
|
|
|
| |
723 | INPUT VIDEO BLANK | Switch blanking on or off for individual lines in the vertical blanking interval of | |||
|
|
|
|
| an input video signal. The Y/C signal and odd/even fields are blanked |
|
| ||||
|
| simultaneously. | |||
|
|
|
|
| |
|
|
|
|
| A signal with blanking carried out according to this setting is recorded. |
|
|
|
|
|
|
| 1 | ALL LINE |
| - - | |
|
|
|
|
| blnk (blank): Regardless of the setting of other |
|
|
|
|
| which can be specified in this menu item. |
|
|
|
|
| thru (throu): Regardless of the setting of other |
|
|
|
|
| for all lines which can be specified in this menu item. |
|
|
|
|
| |
| 2 ... | LINE 12 ... |
| In 525(U)/ | Specify blanking for lines 12 to 20. |
| 10 | LINE 20 |
| 525(J) line | blnk (blank): Carry out blanking. |
|
|
|
| modes | thru (throu): Switch off blanking. |
|
|
|
|
|
|
| 2 ... | LINE 9, 322 |
| In 625 line | Specify blanking for lines 9, 322 to 22, 335. |
| 15 | ... |
| mode | blnk (blank): Carry out blanking. |
|
| LINE 22, 335 |
|
| thru (throu): Switch off blanking. |
|
|
|
|
|
|
726 | H BLANKING WIDTH |
| Select the horizontal blanking width of the output analog video signal. | ||
|
|
|
|
| narow (narrow): Digital blanking (narrow) |
|
|
|
|
| wide: Analog blanking (wide) |
|
|
|
|
| When “wide” is selected, the horizontal blanking width complies with RS170A, |
|
|
|
|
| and normally the blanking is widened and the image becomes narrower. It is |
|
|
|
|
| recommended to select “narow” at the editing stage, then later, for broadcast |
|
|
|
|
| transmission to select “wide,” to output a signal conforming to the standard. |
|
|
|
|
| Note, however, that “narow” has to be always selected for SDI signals. |
|
|
| |||
728 | OUTPUT SCH PHASE | Set the subcarrier H phase. | |||
|
|
|
|
| |
|
|
|
|
|
|
Menus 7 Chapter