Sony PDW-R1 manual 124

Troubleshooting and Maintenance 8 Chapter

Message in time	Display	Description	Action
data display	condition a)
4CHx24 Clip	on, limit	The number of channels and quantizing	To record on the disc, change the setting of
8CHx16 Clip		bits of the loaded disc differ from the	maintenance menu item “AUDIO CONFIG”
		specifications of maintenance menu item	- “DATA LENGTH.”
		“AUDIO CONFIG” - “DATA LENGTH.”	See 7-4-2 “Maintenance Menu Operations”
			(page 114) about how to change this
			setting.
No Support!	on, limit, off	A disc recorded in an unsupported	Use a disc recorded in the MPEG IMX or
		recording format was inserted.	DVCAM format.
ILL. Index!	on, limit, off	An index file error was detected.	Format the disc.
			For details, see 3-6-5 “Formatting a Disc”
			(page 39).
FORMAT NG!	on, limit, off	Automatic format failed.	Use another disc.
DI read err	on, limit, off	A disc read error occurred.	Try ejecting the disc and inserting it again,
			or insert another disc.
DRV ADJ err	on, limit, off	Adjustment processing failed when a
		disc was inserted.
a) With respect to setting of basic menu item 016

During playback

Message in time	Display	Description	Action
data display	condition a)
525/60 Disc	on, limit	An attempt was made to play back a disc	Use a disc recorded with the PAL system.
		recorded with the NTSC system when
		this unit is in 625 line mode (PAL
		system).
625/50 Disc	on, limit	An attempt was made to play back a disc	Use a disc recorded with the NTSC
		recorded with the PAL system when this	system.
		unit is in 525(U) or 525(J) line mode
		(NTSC system).
Disc Error!	on, limit, off	Normal playback is not possible because	Use another disc.
		of a disc defect.	You can check the state of a disc by
			checking playback condition marks (see
			page 36).
a) With respect to setting of basic menu item 016

During control panel operations

Message in time	Display	Description	Action
data display	condition a)
KEY INHI.!	on	An operation button inhibited by	Set the corresponding sub-item of
		extended menu item 118 “KEY INHIBIT”	extended menu item 118 to “off.”
		was pressed while the KEY INH	See 7-3-2 “Extended Menu Operations”
		indicator was lit.
			(page 108) about how to make this setting.
REMOTE!	on	A button was pressed while the remote	To operate from the front panel, wait until
		control switch was set to “REMOTE.”	control by the remote device ends and then
			set the remote control switch to “LOCAL.”

124 8-4 Alarms