Menus 7 Chapter
1 Using the F/f buttons to select “IP ADDRESS.” 2 Press the g button.
The IP ADDRESS PRESET menu appears, and the digit that can be changed flashes.
Item selection screen
Flashing
IP ADDRESS PRESET
IP : 192.168.001.010
DHCP: disable
SHIFT : (C)(c)KEY
INC/DEC : JOG DIAL
CLEAR : RESET KEY
DATA SET : SET KEY
TO MENU : MENU KEY
3 Set the IP address.
To select a different digit to be changed
Use the G/g buttons.
To change the value of a digit Turn the jog dial or shuttle dial.
Turning clockwise increases the value, and turning counterclockwise decreases the value.
The F/f buttons can be used.
To return to the factory default setting
Press the RESET button.
4 When all digits are set, press the SET button.
This returns to the NETWORK CONFIG menu.
To cancel a setting
Before pressing the SET button, press the MENU button.
This returns to the NETWORK CONFIG menu, without saving the new setting.
5 Repeat steps 1 to 4 as required, to set the subnet mask and default gateway.
6 In the NETWORK CONFIG menu, press the SET button.
7 When the “NOW SAVING...” message vanishes, power the unit off and then on again with the on/ standby switch.
Setting the communications speed
Set the communications speed (LINK SPEED) and communications method (DUPLEX) to match the network environment.
For details of the operation, see “Basic maintenance menu operations” (page 114).
116