Sony PDW-R1 manual 83

Command name	Description	Command syntax
STRU	Specifies the data structure.	STRU <SP> <structure-code> <CRLF>
		<structure-code> can be any of the following. However, for
		XDCAM, the structure is always “F,” regardless of the
		structure-code specification.
		•	F: File structure (default)
		•	R: Record structure
		•	P: Page structure
		Input example: STRU F
MODE	Specifies the transfer mode.	MODE <SP> <mode-code> <CRLF>
		<mode-code> can be any of the following. However, for
		XDCAM, the mode is always “S,” regardless of the mode-
		code specification.
		•	S: Stream mode (default)
		•	B: Block mode
		• C: Compressed mode
		Input example: MODE S
LIST	Sends a list of files from this unit to the	LIST <SP> <options> <SP> <path-name> <CRLF>
	remote computer.	<options> can be any of the following.
		•	-a: Also display file names that begin with “.”
		•	-F: Append “/” to directory names.
		The following data is transferred, depending on whether
		<path-name> specifies a directory or file.
		•	Directory specified: A list of the files in the specified
			directory
		•	File specified: Information about the specified file
		•	No specification: A list of the files in the current directory
		The wildcard characters “*” (any string) and “?” (any
		character) may be used in <path-name>.
		Input example 1: LIST -a Clip
		Input example 2: LIST Clip/*.MXF
NLST	Sends a list of file names from this unit	NLST <SP> <options or path-name> <CRLF>
	to the remote computer, with no other
	information.	The following options may be specified when no path name
		is specified.
		•	-a: Also display file names that begin with “.”
		• -l: Display information other than file name (gives the same
			result as the LIST command).
		•	-F: Append “/” to directory names.
		The following data is transferred, depending on whether
		<path-name> specifies a directory or file.
		•	Directory specified: A list of the file names only in the
			specified directory
		•	No specification: A list of the file names only in the current
			directory.
		The wildcard characters “*” (any string) and “?” (any
		character) may be used in <path-name>.
		Input example 1: NLST -l
		Input example 2: NLST Clip/*.MXF
RETR	Begins transfer of a copy of a file in the	RETR <SP> <path-name> <CRLF>
	specified path on this unit to the current
	directory on the remote computer.	Input example: RETR Clip/C0001.MXF

Operations File 6 Chapter

6-3 FTP File Operations 83