Star Micronics LC-20 user manual Relativetothepage

If the paperpark facilitydoesnot appearto be workingcorrectly,checkthe following:

Check	Possibleremedy
Isthepaperreleaseleverin	Thepaperreleaselevermustbeset to the ~ position
the ~ position?	after the fanfold paper has been parked.

Has the fanfold paper been properly parked?

Make sure that the indicator comes on flashing after the fanfold paper has been parked.

Ift is beingprinted all on one line, or with extra blank lines, check the following:

Check

Is the text all on the same be?

Is text being printed with extra blank lines?

Possible remedy

Carriage returns are not being expanded to <CR> + <LF>pairs. Check the DIPswitchsetting and correct.

Two line feeds are being printed. Make your software print just acarriageretumor (if this isnotpossible), set the AUTO LF to OFF with the DIP switch setting.

If thepagelengthandmarginsarenotwhatis expected,checkthefollowing:

I CheckI Possible remedv

Istheprintingstartingtoo	UsetheMicroFeedfunctiontoadjusttheprintposition
highortoolowonthepage?	relativetothepage.
Does the printer’s page	Use the DIP switch to setup the correct page length, or
length notmatchthephysical	use software commands to do it.
page length?

94