FONTbutton

This button selectsthe font to be printed.Draft font is always selectedat power-up.To changeto one of the NLQ (near letterquality)fonts, set the printeroff-line,then press the FONTbuttonrepeatedlyuntil the indicators besidethe desiredselectionilluminate.The selectionscycle in the follow- ing order:

Font

Indicator(s)

Draft

DRAFT

Courier

COURIER

Sanserif

SANSERIF

Orator

ORATOR

TheOratorfontisuniqueintwoways.First,itislarger(higher)thantheother fonts,whichmakesit a goodchoicefor labelsand othertext requiringhigh visibility.You will need a little extra line spacing when Orator is used. Second,there are two versionsof the Oratorfont:one prints smallcapitals in placeof lower-caseletters;theotherprintslower-caseletters,butwithout descenders.Theotherfontsdo nothavea small-capitalsoption.Lowercase will alwaysprint as lower case.

Theversionyouget whenyouselectOratorfromthecontrolpaneldepends on the DIP switches.If DIP switch 1-6is OFF,lower-caseOratorwillprint as lower case. Otherwiseit will print as smallcapitals.

The font can also be selected by printer commandsgiven in Chapter4. Printercommandsenableyou to selectboth Oratorfonts.

20

Page 28
Image 28
Star Micronics LC-20 user manual FONTbutton