Star Micronics NX-2460 Selecting fonts in MS-DOS applications, Using the Printer with MS-DOS

44Using the Printer with MS-DOS

❏If none of the printers listed above is available in the application, choose one of the following. Once again, you should choose the one that is nearest to the top in the following list. Use User Setup Utility to select IBM emulation (page 20).

IBM ProPrinter X24E/XL24E

IBM ProPrinter X24/XL24

The above two printers are shaded because they are not color printers. This means that you will not be able to print in color if your select one of these.

Note:

You cannot print in color unless you select the name of a color printer.

❏To print, follow the instructions given in the manual of the application you are using. Typically, you would select the application’s PRINT command, make any necessary changes in the window that appears (such as the number of copies to be printed), and then press the Enter key to start printing.

Selecting fonts in MS-DOS applications

Use the User Setup Utility to select a font when running an application under MS-DOS. For details on the fonts that are available and how to select them, see “LQ Font” on page 22 of this manual.