Star Micronics NX-2460C Troubleshooting guide, Problem, Possible Cause, Recommended, Action

		Troubleshooting guide 51
Problem	Possible Cause	Recommended
		Action
Line spacing is incorrect.	Jamming paper.	Set up the printer for the
		paper thickness you are
		using. See “Adjusting for
		paper thickness” on page 40.
	The line spacing or leading	Choose a different line
	selected your application	spacing or leading setting
	program is wrong.	from your application.
	Auto line feed with carriage	Use the User Setup Utility to
	return is enabled by the User	disable auto line feed with
	Setup Utility.	carriage return. See “Auto
		LF with CR” on page 24.
Lines print over each other.	Auto line feed with carriage	Use the User Setup Utility to
	return is disabled by the	enable auto line feed with
	User Setup Utility.	carriage return. See “Auto
		LF with CR” on page 24.
	Jamming paper.	Set up the printer for the
		paper thickness you are
		using. See “Adjusting for
		paper thickness” on page 40.
Incorrect number of lines are	Auto line feed with carriage	Use the User Setup Utility to
printed on the page.	return is enabled by the User	disable auto line feed with
	Setup Utility.	carriage return. See “Auto
		LF with CR” on page 24.
	The line spacing or leading	Choose a different line
	selected by your application	spacing or leading setting
	program is wrong.	from your application.
Text and graphics are	Vertical dot adjustment is not	Use the User Setup Utility to
malformed.	set properly.	set the printer’s vertical dot
Print quality is poor.		alignment.
	The printer is not set up	Set up the printer for the
	correctly for the thickness of	paper thickness you are
	paper being used.	using. See “Adjusting for
		paper thickness” on page 40.