Sun Microsystems 5210 NAS manual Removing a Hot Spare, 4The Add Hot Spare Dialog Box

2. Click Add HS.

FIGURE 9-4The Add Hot Spare Dialog Box

3.Select the drive you want by clicking the drive image. The default selection is the left-most available drive on the screen. Be sure that the disk you use as a hot spare is at least as large as the largest disk in any LUN on this Sun StorEdge 5210 NAS unit.

4.Click Apply to add the new hot spare.

Removing a Hot Spare

To remove hot spare status from a drive in the RAID array:

1.In the navigation panel, select RAID > Manage RAID.

2.Select the hot spare to be removed by clicking the drive image. If there is only one hot spare, it is automatically selected.

78 Sun StorEdge 5210 NAS Quick Reference Manual • November 2004