To set up diagnostic
1.In the toolbar at the top of the screen, select the button. The Diagnostic Email dialog box appears.
FIGURE
2.Enter a description of the problem in the Problem Description field. This is a mandatory entry and is limited to 256 characters.
3.Enter at least one
4.Check the type of message you want to send: Notification, Diagnostic, or both.
5.Click the button to add the new recipient to the List of recipients. You can add
a maximum of four e-mail addresses in the list.
To remove a recipient from the list, select the
6.Click Send to send the message.
82 Sun StorEdge 5210 NAS Quick Reference Manual • November 2004