TABLE10 ConnectivityMap - Lower Layer Protocol (Continued)
Name Description
EndData Character Thesecond to the last envelope marker character in the HL7 envelope, as a
decimalASCII number. Enter a number from 1 to 127. Unless there is a conict,
thevalue should be ASCII FS (decimal 28).
EndBlock Character Thelast envelope marker character in the HL7 envelope, as a decimal ASCII
number.Enter a number from 1 to 127. To strictly comply with the HL7
Standard,this property must be set to a carriage return (decimal 13).
HLLPChecksum Enabled Anindicator of whether the HLLP Checksum is enabled or disabled.
Selecttrue to enable checksum values; otherwise select false.
MaxNumber of Retries Themaximum number of times the adapter tries to send a message upon
receivingthe MLLP v2.0 Negative Commit Acknowledgement from the peer
beforegiving up. This property is used by the adapter in outbound mode. Enter
anyinteger.
Sequence Number Protocol— TCP/IP HL7 V2 Inbound
Adapter
Thefollowing table lists and describes the property that appears on the Sequence Number
Protocolpage of the Properties Editor accessed from the Connectivity Map. This property
enablesor disables HL7 sequence numbering, which is used to help prevent duplication of data.
TABLE11 ConnectivityMap - Sequence Number Protocol
Name Description
SequenceNumber
Enabled
Anindicator of whether sequence numbering is enabled or disabled. Enabling
sequencenumbering helps prevent duplication of data. Select true to enable
sequencenumbering; otherwise select false.
HL7 MSH Segment —TCP/IP HL7 V2 Inbound Adapter
Thefollowing table lists and describes the properties that appear on the HL7 MSH Segment
pageof the Properties Editor accessed from the Connectivity Map. These properties dene the
congurationof the MSH segment of the HL7 message. For more information about this
segment,refer to the HL7 specication (http://www.hl7.org).
TCP/IPHL7V2 Adapter Inbound Connectivity Map Properties
SunAdapterfor TCP/IP HL7 User's Guide 41