SUPER MICRO Computer X6DAT-G user manual Quick Reference, Jumper Description Default Setting

		Chapter 1: Introduction
	Quick Reference
Jumper	Description	Default Setting
JBT1	CMOS Clear	(See Chapter 2)
JK1	Keylock Enable	Close (Enabled)
JP13	3rd PWR Supply Failure Alarm Enab.Open (Disabled)
JP15	Reboot Option Enable	Open (Enabled)
JPAC	Audio Enable/Disable	Pins 1-2	(Enabled)
JPF	Force Power On	Open (Disabled)
JPL1	Giga-bit LAN Enable/Disable	Pins 1-2	(Enabled)
JPS1(*X6DAT)	Serial ATA Enabled	Pins 1-2	(Enabled)
JWD	Watch Dog Enable	Pins 1-2 (Reset)

Connector	Description
J1B4	Primary 24-pin ATX PWR Connector
J1D1,J32	12V 8-pin PWR/12V 4-pin CPU PWR Connectors
J6, J38	COM1/COM2 Serial Port Connectors
J3, J4	IDE1/2 Hard Disk Drive Connectors
J9	Keyboard/Mouse
J22	System Management Bus
J23	Parallel (Printer) Port
J24	Power System Management Bus
JAR	PWR Fail Alarm Reset
JC1, JC2	Audio: Mic(JC1), Line-In/Line-Out(JC2)
JD1	PWR LED (Pins1-3), Speaker (Pins 4-7)
JF1	Front Panel Control
JL1	Chassis Intrusion Header
JOH1	Overheat LED
JP8	Floppy Disk Drive Connector
JP12	Power Fault Connector
JHS1/JHS2	I-SATA0/1:Intel (6300 ESB) Serial ATA0/1 Headers
JLAN 1	G-bit Ethernet Port
JS1-JS4 (*X6DAT only) M-SATA0-3:Mavell's Serial ATA 0-3 Headers
JS10 (*X6DAT only)	SATA I2C:Serial ATA System Management Bus
JS9 (*X6DAT only)	Serial ATA Activity LED Connector
FAN #1-#8	Chassis Fans Headers/CPU Fan1/CPU Fan2
DIMM#1A-#4B	Memory (RAM) Slots#(1A,1B, 2A,2B, 3A,3B,4A,4B)
DS1-4,DS9-12 (*X6DAT)Marvell's SATA Status LEDs (*DS1:PRE0,
	DS9:ACT0/DS2:PRE1, DS10:ACT1/DS3:PRE2,
	DS11:ACT2/DS4:PRE3,D12:ACT3)
WOL(JWOL)	Wake-on-LAN Header
WOR(JWOR)	Wake-on-Ring Header
USB#0-1(J40)	(Back Panel) Universal Serial Bus Ports
USB#2-3(JD2)	(Front Panel) Universal Serial Bus Headers

1-5