![](/images/new-backgrounds/1269462/269462171x1.webp)
To configure SATA RAID for Operating Systems that support RAID
1.Select "Main Setup Setting" from the Phoenix BIOS menu and set "SATA RAID Enable" to Enable. (The Defualt setting is Disabled.)
3.Go to the "Exit" menu and select "Save and Exit". Hit the <Enter> key to save the change and exit the Phoenix BIOS.
4.Press <Ctrl><A> for Adaptec RAID Configuration Utility.
The Adaptec Embedded Serial ATA with HostRAID Con- troller Driver
Adaptec's Embedded Serial ATA RAID with HostRAID controller adds RAID functionality to the Serial ATA I/O controller by supporting RAID 0 (Striping) or RAID 1 (Mirroring) to enhance the industry's pioneer
asingle hard disk fails. Due to the
of SATARAID without the high costs associated with hardware RAID applications.
(*Note: For Adaptec's RAID Driver Installation Instructions, please refer to
the Adaptec RAID Controller User's Guide: "Emb_SA_RAID_UG.pdf" in the CD that came with this motherboard. You can also download a copy of Adaptec's User's Guide from our web site at www.supermicro.com.)