![](/images/new-backgrounds/1269462/269462115x1.webp)
Legacy Diskette A
This setting allows the user to set the type of floppy disk drive installed as diskette A. The options are Disabled, 360Kb 5.25 in, 1.2MB 5.25 in, 720Kb 3.5 in, 1.44/1.25MB, 3.5 in and 2.88MB 3.5 in.
Parallel ATA
This setting allows the user to choose the function of IDE channels. The options are Disabled, Channel 0, Channel 1 and Both.
Serial ATA
This setting allows the user to enable or disable the function of Serial ATA. The options are Disabled and Enabled.
Serial ATA RAID Enable
Select Enable to enable Serial ATA RAID Functions. (*For the Windows OS environment, use the RAID driver if this feature is set to Enabled. If Disabled, use the
Native Mode Operation
This option allows the user to select Native Mode for ATA. If enabled, Native Mode allows the OS much more flexibility in assigning resources, reducing the occurrences of component incomparability in the system. Some Operating Systems are not supported by Native Mode. The options are: Serial ATA, Parallel ATA, Auto, and Both.
IDE Channel 0 Master/Slave, IDE Channel 1 Master/Slave, IDE Channel 2 Master, IDE Channel 3 Master
These settings allow the user to set the parameters of IDE Channel 0 Master/Slave, IDE Channel 1 Master/Slave, IDE Channel 2 Master, IDE Channel 3 Master slots. Hit <Enter> to activate the following