Chapter 2: Installation
2-3
1. Do not apply any thermal compound to
the heatsink or the CPU die-the required
amount has already been applied.
2. Place the heatsink on top of the CPU so
that the four mounting holes are aligned with
those on the retention mechanism.
3. Screw in two diagonal screws (ie the #1
and the #2 screws) until just snug (-do not
fully tighten the screws to avoid possible
damage to the CPU.)
4. Finish the installation by fully tightening
all four screws.
Passive Heatsink
Screw#1 Screw#2
Heatsink Installation
IMPORTANT: Due to the weight of the Passive Heatsink (about 1KG), you
need to have Heatsink Mounting plate installed on the chassis to prevent
damage to the CPU and the motherboard)
(*Note: The CPU heatsink shown in the picture above is for display only. Your heatsink
may or may not look exactly the same as the one shown in the graphic above.)
!