D9 Viewer Software
Network
For users with minimal network knowledge it is best to use the DHCP when setting the DVR to view remotely. Note: These settings should already being configured using the DVR. See Network Setup on page 35.
1. Network - Type
i. Scroll over the dropdown list and LEFT click.
ii.Select DHCP to setup the DVR & view it remotely.
iii.LEFT click.
iv.Logout and log back in.
Setting
Here you can set the location where files will be saved, assign an admin & user password and set up daylight savings time.
File Save Path
1. Scroll over & LEFT click the | button. |
2.Select the location where you want to store saved files.
3.LEFT click OK.
Password Enable
The password can restrict unauthorized users from accessing the DVR either by restricting them to enter the menu on the DVR or from logging in remotely.
1.Scroll over the
2.Select ON if you wish to set up a password for the DVR.
3.Left click.
You will see four text fields become active; one for USER password one for ADMIN password and the other two for verifying the passwords you input.
1.LEFT click on the USER PASSWORD text field.
2.Type in your password. Note: be sure to delete the default password already in the text field.
3.Now confirm your password by retyping it in the
4.Follow the steps above to enter the ADMIN password in the ADMIN PASS- WORD text field.
5.LEFT click APPLY.
36
