Swann DVR8-2500 D9 Viewer Software (continued)

D9 Viewer Software (continued)

In the RECORD screen in SETUP you can change the camera record settings. You can turn each channel on or off, select

the recording resolution & quality, turn on or off the audio, select a record mode and set up the record schedule.

3. Audio

i. Scroll over the dropdown list and LEFT click.

ii. Select ON to switch audio (for all channels). Selecting OFF will turn audio off.

4. Record Mode

i. Scroll over the dropdown list and LEFT click.

ii. Select ON to switch recording on for that channel. Selecting OFF will turn recording OFF.

5. Schedule

i. Scroll over the button and LEFT click.

ii. You will see a new schedule open. It will include 24 columns from 0-23 each presenting an hour of the day and 7 rows for each day of

the week. Each box representing and hour in the week.

iii. Scroll over the button and LEFT click.

iv. Scroll over & LEFT click the channel you want to set the schedule for in

the dropdown list.

v. Scroll over & LEFT click a record mode.

vi. Scroll over & LEFT click the boxes to set the hours to the record mode

you chose.

RED = ALARM

GREEN = NORMAL

WHITE = NO RECORD

2. Resolution & Quality

Scroll over & LEFT click to highlight a button to set the QUALITY;

BEST, FINE or NORMAL.

vii. Scroll over then LEFT click (beside the COPY).

viii. You will see a dropdown list with SUN, MON, TUE, WED, THU,

FRI & SAT.

ix. Scroll over the day you want to copy the schedule FROM.

x. LEFT click.

xi. Scroll over then LEFT click (beside the SET TO).

xii. This time the dropdown list will include an ALL option includ-

ing all the days of the week listed above. Scroll over the day

you want to copy the schedule TO. Selecting ALL will copy the

schedule to all the other days of the week.

xiii. LEFT click.

xv. After you have chosen the day you want to copy from and the

day you want to copy to, scroll over & click the button.

Most of the options that you will ﬁnd here operate in exactly the same manner as on your DVR.

However, note that, as this software can be used to control a few different models of DVR, that

occasionally an option will be displayed which has no effect on your DVR. Don’t worry about

these settings - they won’t interfere with the operation of your DVR.