TANDBERG 5000 user manual Presets, Selecting presets, Storing presets

General use VISION 5000 Videoconferencing System

Presets

The preset buttons enable you to pre-store up to ten different settings. Each preset is able to store:

•Video source

•Camera position, pan/tilt/zoom/focus (if Main Camera)

•Brightness (if Main Camera)

•Audio source selection (see ‘Audio set-up’ in ‘Advanced use’)

Selecting presets

To select a pre-stored camera position, audio and video source, use the keys P1 P2 P3 P4 or press OK until LocalCamera appears as an on screen indicator and use 0-9 to activate P0-P9 presets.

P1-P4 are the same presets as when pressing OK and 1- 4.

Storing presets

1 2 3

4 5 6

To store the current camera position, audio and video source:

7 8 9

* 0 # D

• Press STORE once.

• Then press one of the keys P1 P2 P3 P4 or a key 0-9.

32