TANDBERG 5000 user manual Utilities, Autoanswer, Do not disturb, Far end camera control, Hotline

ACCEPT

END CALL

Advanced use VISION 5000 Videoconferencing System

Utilities

============ Utilities ============

Autoanswer:	Off	On
Do Not Disturb:	Off	On
Far End Camera Control: Off		On
Hotline:	Off	On
Automatic Call-up:	Off	On
MCU Status Line:	Off	On
Systemname:	_____________

Presentation Settings

Diagnostics

Previous Menu

Autoanswer

If autoanswer is set to Off, you must manually answer all incoming calls by pressing the SEND	ACCEPT
	or theEND CALL key.

When Autoanswer is set to On, the system will automatically answer all incoming calls after the first ring.

Do not disturb

Do Not Disturb On will remove all audible and visible indications of incoming calls. The caller will hear a busy ringing tone when calling this unit. The function can be activated while the system is not in a call. Pressing any key will turn off Do Not Disturb.

Far end camera control

When Far End Camera Control is On, the other side will be able to:

•Control your camera (if controllable)

•Select your video sources

•Activate your presets

•Request still images

When set to Off none of the four features above can be accessed by the other side, however you will still be able to control the remote side.

Hotline

When the hotline function is On, pressing the SEND or the key will automatically dial the number stored in index 01 in the Directory. When Hotline is active you cannot use the number keys for dialling. You may still use the Directory to dial any of the other pre-stored numbers.

44