Peripherals | VISION 5000 Videoconferencing System |
Video Cassette Recorder (VCR)
Vision 5000: Video Output 2
VCR: Video Input
Vision 5000: Video Input 5
VCR: Video Output
To simplify connecting a VCR, the necessary connectors are marked ‘VCR’
Vision 5000: Audio Output 3
VCR: Audio Input
Vision 5000: Audio Input 6
VCR: Audio Output
VCR
VCR - Playback
For playback, connect a cable between Video Out on the VCR and ‘VideoIn 5 (VCR)’ on the system and from Audio Out on the VCR to ‘AudioIn 6 (VCR)’ on the system.
VIDEO
Select correct video input on the system using SOURCE . Make sure that ‘Audio In 6 (VCR)’ is On (see ‘Audio Setup’. If audio from VCR is too low, this level can be adjusted in ‘Audio Setup’, ‘Inputs’, ‘Level Settings’. The audio from the VCR will be audible in the local speaker system.
The audio from the VCR and your microphone(s) will be mixed and sent to the other side. When a person talks the VCR level will be reduced to make it easier to comment a video recording (when ‘Audio Setup’, ‘Mix Mode: Auto’).
VCR - Recording
When recording, the VCR will record the video as showed on the main monitor, the local audio and the audio from the other side.
When recording a videoconference, connect a cable between ‘VideoOut 2’ on the system and Video In on the VCR. Connect a cable between ‘AudioOut 3’ on the Vision 5000 to Audio In on the VCR.
84
