TANDBERG 5000 user manual Terminal settings, Network configuration, ISDN-BRI ISDN-PRI/T1 External

VISION 5000 Videoconferencing System Advanced use

Terminal settings

======== Terminal Settings ========

NetworkData Port 1 Restore Defaults Data Port 2 TCP/IP Settings Language Previous Menu

This menu provides basic network setup for the unit and should be used when installing the system. In addition to network setup and data port setup you can also select different languages for the system menus.

Network configuration

============= Network =============

Current Network:

ISDN-BRI ISDN-PRI/T1 External

ISDN-BRI Settings ISDN-PRI/T1 Settings External Network Settings Previous Menu

Before using the system it is necessary to specify which network to use, and define the settings specific to that network.

If you want to use your system via ISDN-BRI you should select ‘Current Network: ISDN-BRI’ and enter the ‘ISDN-BRI Settings’ menu to set the BRI parameters.

If you want to use your system via ISDN-PRI/T1 (optional, USA only) you should select ‘Current Network: ISDN-PRI/T1’ and enter the ‘ISDN-BRI/T1 Settings’ menu to set the PRI/T1 parameters.

If you want to use special networks and connect using RS449, V.35, X.21 or connect to ISDN via an external IMUX you should select ‘Current Network: External’ and enter the ‘External Network Settings’ menu to set the External Network parameters.

63