Nortel Networks 350 manual Trunk Configuration Screen for Switch S4

BayStack 350 10/100/1000 Series Switches

Trunk Configuration Screen for Switch S4

As shown in Figure 1-33, switch S4 is set up with one trunk configuration (T5). This trunk connects directly to switch S1.

As in the previous screen examples, to set up a trunk configuration choose MultiLink Trunk Configuration from the MultiLink Trunk Configuration Menu screen.

Figure 1-38 shows the MultiLink Trunk Configuration screen for switch S4.

				MultiLink Trunk Configuration
Trunk		Trunk Members				STP Learning		Trunk Mode	Trunk Status
----- ----------------------------						------------		---------------	------------
1	[	5 ][ 11	][	][	]	[ Normal	]	Basic	[ Enabled ]
2	[	][	][	][	]	[ Normal	]	Basic	[ Disabled ]
3	[	][	][	][	]	[ Normal	]	Basic	[ Disabled ]
4	[	][	][	][	]	[ Normal	]	Basic	[ Disabled ]
5	[	][	][	][	]	[ Normal	]	Basic	[ Disabled ]
6	[	][	][	][	]	[ Normal	]	Basic	[ Disabled ]
Trunk		Trunk Name

------------------------

1 [ S4:T5 to S1 ]

2 [ Trunk #2 ]

3 [ Trunk #3 ]

4 [ Trunk #4 ]

5 [ Trunk #5 ]

6 [ Trunk #6 ]

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 1-38. MultiLink Trunk Configuration Screen for Switch S4

304376-B Rev 00 1-53