Nortel Networks 350 manual Trunk Configuration Screen for Switch S3

BayStack 350 10/100/1000 Series Switches

Trunk Configuration Screen for Switch S3

As shown in Figure 1-33 on page 1-45, switch S3 is set up with one trunk configuration (T4). This trunk connects directly to switch S1.

As in the previous screen examples, to set up an inter-switch trunk configuration choose MultiLink Trunk Configuration from the MultiLink Trunk Configuration Menu screen.

Figure 1-37 shows the MultiLink Trunk Configuration screen for switch S3.

				MultiLink Trunk Configuration
Trunk		Trunk Members				STP Learning		Trunk Mode	Trunk Status
----- ----------------------------						------------		---------------	------------
1	[	1 ][ 3	][	][	]	[ Normal	]	Basic	[ Enabled ]
2	[	][	][	][	]	[ Normal	]	Basic	[ Disabled ]
3	[	][	][	][	]	[ Normal	]	Basic	[ Disabled ]
4	[	][	][	][	]	[ Normal	]	Basic	[ Disabled ]
5	[	][	][	][	]	[ Normal	]	Basic	[ Disabled ]
6	[	][	][	][	]	[ Normal	]	Basic	[ Disabled ]
Trunk		Trunk Name

-----------------------

1 [ S3:T4 to S1 ]

2 [ Trunk #2 ]

3 [ Trunk #3 ]

4 [ Trunk #4 ]

5 [ Trunk #5 ]

6 [ Trunk #6 ]

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 1-37. MultiLink Trunk Configuration Screen for Switch S3

The MultiLink Trunk Configuration screen for switch S3 is configured as follows:

•Trunk (read only) indicates the trunks (1 to 6) that correspond to the switch ports specified in the Trunk Members fields.

•Trunk Members indicates the ports that can be configured, in each row, to create the corresponding trunk:

Ports 1 and 3 are assigned as trunk members of trunk 1.

304376-B Rev 00 1-51