
Using the BayStack 350 10/100/1000 Series Switch
In this example, port 23 becomes the designated Monitor Port for switch S1 when you press [Enter] in response to the [Yes] screen prompt. The screen data displayed at the bottom of the screen will change to show the new currently active port mirroring configuration when you press Return.
The Monitoring Mode field [ Address A - > Address B ] indicates that all traffic transmitted by address A to address B will be monitored by the StackProbe attached to Monitor Port 23.
Note: When you enter MAC addresses in this screen, they are also displayed in the MAC Address Table screen (see “MAC Address Table” on page
| Port Mirroring Configuration |
|
|
| ||
Monitoring Mode: | [ | Address A | Address B | ] | ||
| Monitor Port: | [ 23 ] |
|
|
| |
| Port X: | [ | ] |
|
|
|
| Port Y: | [ | ] |
|
|
|
| Address A: | [ |
| |||
| Address B: | [ |
| |||
Is your Port mirroring configuration complete? | [ Yes ] |
| ||||
Currently Active Port Mirroring Configuration |
| |||||
| ||||||
Monitoring Mode: | Address A | Address B | Monitor Port: | 23 | ||
Address A: |
| Address B: |
Use space bar to display choices, press <Return> or <Enter> to select choice. Press
Figure 1-45. Port Mirroring Address-Based Screen Example
|