Nortel Networks 350 manual Port Mirroring Configuration, MultiLink Trunk Utilization Screen Fields

Using the Console Interface

Table 3-16. MultiLink Trunk Utilization Screen Fields (continued)

Field	Description
Last 5 Minutes	This read-only field indicates the percentage of packets (of the type specified in the
	Traffic Type field) utilized by the port in the last five minutes. This field provides a
	running average of network activity and is updated every 15 seconds.
Last 30 Minutes	This read-only field indicates the percentage of packets (of the type specified in the
	Traffic Type field) utilized by the port in the last 30 minutes. This field provides a
	running average of network activity and is updated every 15 seconds.
Last Hour	This read-only field indicates the percentage of packets (of the type specified in the
	Traffic Type field) utilized by the port in the last hour. This field provides a running
	average of network activity and is updated every 15 seconds.

Port Mirroring Configuration

The Port Mirroring Configuration screen allows you to configure a specific switch port to monitor up to two specified ports. You can specify port-based monitoring or address-based monitoring.

For more information about the port mirroring feature, see “Port Mirroring (Conversation Steering)” on page 1-61.

Figure 3-20 shows an example of a Port Mirroring Configuration screen where switch port 12 is designated as the monitoring port for ports 24 and 25.

Choose Port Mirroring Configuration (or press i) from the Switch Configuration Menu screen to open the Port Mirroring Configuration screen.

304376-B Rev 00 3-41