Nortel Networks 350 manual MultiLink Trunk Configuration screen opens Figure

BayStack 350 10/100/1000 Series Switches

The MultiLink Trunk Configuration screen opens (Figure 1-35).

				MultiLink Trunk Configuration
Trunk		Trunk Members				STP Learning		Trunk Mode	Trunk Status
----- ----------------------------						------------		---------------	------------
1	[ 15	][ 17	][ 19	][ 21	]	[ Normal	]	Basic	[ Enabled	]
2	[ 25	][ 26	][	][	]	[ Normal	]	Basic	[ Enabled	]
3	[ 2	][ 4	][	][	]	[ Normal	]	Basic	[ Enabled	]
4	[ 14	][ 16	][	][	]	[ Normal	]	Basic	[ Enabled	]
5	[ 22	][ 24	][	][	]	[ Fast	]	Basic	[ Enabled	]
6	[	][	][	][	]	[ Disabled ]		Basic	[ Disabled ]
Trunk		Trunk Name

------------------------

1 [ S1:T1 to FS2 ]

2 [ S1:T2 to S2 ]

3 [ S1:T3 to S2 ]

4 [ S1:T4 to S3 ]

5 [ S1:T5 to S4 ]

6 [ Trunk #6 ]

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 1-35. MultiLink Trunk Configuration Screen for Switch S1

The MultiLink Trunk Configuration screen for switch S1 is configured as follows:

•Trunk (read only) indicates the trunks (1 to 6) that correspond to the switch ports specified in the Trunk Members fields.

•Trunk Members indicates the ports that can be configured, in each row, to create the corresponding trunk:

Ports 15, 17, 19, and 21 are assigned as trunk members of trunk 1. Ports 25 and 26 are assigned as trunk members of trunk 2.

Ports 2 and 4 are assigned as trunk members of trunk 3. Ports 14 and 16 are assigned as trunk members of trunk 4. Ports 22 and 24 are assigned as trunk members of trunk 5.

304376-B Rev 00 1-47