Nortel Networks 350 manual describes the Igmp Configuration screen fields

Using the BayStack 350 10/100/1000 Series Switch

IGMP Configuration

The IGMP Configuration screen allows you to set your switch ports to optimize IP multicast packets in a bridged Ethernet environment (see “IGMP Snooping” on page 1-34). Figure 3-23 shows an example of the IGMP Configuration screen with switch ports 8 and 14 set to receive/transmit multicast from the local multicast router. The configured ports are VLAN port members of VLAN 5.

Choose IGMP Configuration (or press g) from the Switch Configuration Menu screen to open the IGMP Configuration screen.

		IGMP Configuration
	VLAN:		[	5	]
	Snooping:		[ Enabled			]
	Proxy:		[ Enabled			]
	Robust Value:		[	2	]
	Query Time:		[ 125 seconds ]
	Set Router Ports: [ Version 1 ]
	Static Router Ports
1-6	7-12	13-18	19-24		25
------	------	------	------		------
------	-X----	-X----	------		-

KEY: X = IGMP Port Member (and VLAN Member), - = Not an IGMP Member

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-23. IGMP Configuration Screen

Table 3-20 describes the IGMP Configuration screen fields.

3-48 304376-B Rev 00