Nortel Networks 350 manual 12 .1Q Tagging 3

Using the BayStack 350 10/100/1000 Series Switch

In Figure 1-12, tagged incoming packets are assigned directly to VLAN 2 because of the tag assignment in the packet. Port 5 is configured as a tagged member of VLAN 2, and port 7 is configured as an untagged member of VLAN 2.

			PVID = 2
Tagged packet
					4
CRC	Data	Tag	SA	DA	Port
	Before

Port 1		Port 2	Port 3
	802.1Q Switch
Port 6		Port 7	Port 8

Port 5

Tagged member of VLAN 2

Untagged member of VLAN 2

BS35013A

Figure 1-12. 802.1Q Tagging (3 of 4)

As shown in Figure 1-13, the tagged packet remains unchanged as it leaves the switch through port 5, which is configured as a tagged member of VLAN 2. However, the tagged packet is stripped (untagged) as it leaves the switch through port 7, which is configured as an untagged member of VLAN 2.

PVID = 2

Port 4

Port 1		Port 2	Port 3
	802.1Q Switch
Port 6		Port 7	Port 8

Port 5

Tagged member of VLAN 2

CRC Data Tag SA DA

Untagged member	CRC*	(*Recalculated)
of VLAN 2
	Data
	SA	Outgoing
		untagged packet
		changed
	DA
		(tag removed)

	8100	Priority	CFI	VID = 2
	16 bits	3 bits	1 bit	12 bits
		After
Key
Priority	- User_priority
CFI	- Canonical format indicator
VID	- VLAN identifier

BS35014A

Figure 1-13. 802.1Q Tagging (4 of 4)

1-22 304376-B Rev 00