Nortel Networks 350 manual Gigabit MDA only supports 1000 Mb/s in full-duplex mode

Using the Console Interface

				Port Configuration
Port	Trunk	Status		Link	Auto Negotiation		Speed	Duplex
----	-----	------------		----	----------------		-----------------
15		[ Enabled	]	Up	[ Enabled	]	[ 100Mbs / Full ]
16		[ Enabled	]	Down	[ Disabled ]		[ 100Mbs / Half ]
17	1	[ Enabled	]	Up	[ Disabled ]		[ 100Mbs / Half ]
18		[ Enabled	]	Down	[ Disabled ]		[ 100Mbs / Half ]
19	3	[ Enabled	]	Up	[ Disabled ]		[ 100Mbs / Half ]
20	3	[ Enabled	]	UP	[ Disabled ]		[ 100Mbs / Half ]
21		[ Enabled	]	Down	[ Disabled ]		[ 100Mbs / Half ]
22	4	[ Enabled	]	Up	[ Enabled	]	[ 100Mbs / Full ]
23	4	[ Enabled	]	Up	[ Enabled	]	[ 100Mbs / Full ]
24		[ Enabled	]	Down	[ Enabled	]	[ 100Mbs / Full ]
25	1	[ Enabled	]	Up	[ Enabled	]	[ 100Mbs / Full ]
26	1	[ Enabled	]	Up	[ Enabled	]	[ 100Mbs / Full ]
27		[ Enabled	]	Down	[ Disabled ]		[ 10Mbs	/ Full ]
28		[ Enabled	]	Down	[ Disabled ]		[ 10Mbs	/ Full ]
All		[ Enabled	]		[ Disabled ]		[ 10Mbs	/ Full ]

Press Ctrl-P to display choices for ports 1-14.

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-14.	Port Configuration Screen (2 of 2)
	Note: When a gigabit MDA is installed, only the Status field for that MDA
	port is configurable. See “ High Speed Flow Control Configuration” on
	page 3-32 to set the autonegotiation field for the gigabit MDA port. The
	gigabit MDA only supports 1000 Mb/s in full-duplex mode.
	Table 3-12 describes the Port Configuration screen fields.
Table 3-12.	Port Configuration Screen Fields
Field	Description
Port	Indicates the switch port numbers that correspond to the field settings in that row of
	the screen (for example, the field settings in row 2 apply to switch port 2). Note that
	the settings applied in the All row (bottom row) affect all switch ports (except the
	gigabit MDA port, when installed).
	(continued)
304376-B Rev 00	3-31