Nortel Networks 350 manual Describes the Vlan Configuration screen fields

Using the Console Interface

Table 3-8 describes the VLAN Configuration screen fields.

Table 3-8.	VLAN Configuration Screen Fields
Field		Description
Create VLAN		Allows you to set up or view configured VLAN workgroups. Enter the number
		of the new VLAN you want to create or view, then press [Return]. The Port
		Membership fields indicate the corresponding VLAN workgroup configuration,
		if configured, or all dashes (-), indicating no VLAN Members configured.
		Alternatively, you can use the spacebar to toggle through the various
		configured VLAN workgroups. You can only create up to 64 different VLANs.
		Default	1
		Range:	2 to 4094
Delete VLAN		Allows you to delete specified VLANs. Enter the number of the VLAN you want
		to delete, then press [Return], or use the spacebar to toggle through the
		selection until you reach the VLAN you want to delete, then press [Return].
		The selected VLAN is deleted as soon as you press [Return]. The software
		does not prompt you to reconsider this action.
		You cannot delete VLAN 1. By default, all switch ports are assigned as
		untagged members of VLAN 1 with all ports configured as PVID = 1). See
		“IEEE 802.1Q VLAN Workgroups” on page 1-18 for more information.
		Default	blank field
		Range:	2 to 4094
VLAN Name		Allows you to assign a name field to configured VLANs.
		Default	VLAN # (VLAN number)
		Range:	Any ASCII string of up to 16 printable characters
Port Membership		Allows you to assign switch ports as a tagged port member (T), untagged port
		member (U), or as a non-VLAN port member (-). Switch ports can be
		configured in one or more VLANs. An exception to this rule applies to the
		gigabit MDAs (see note).
		Note: The gigabit MDAs restrict the configuration of VLAN tagging. The
		gigabit MDA ports can be set up as tagged VLAN members or as untagged
		VLAN members for a VLAN that has a VID which is equal to the port’s PVID.
		For all other VLANs configured on that port the VLAN port membership will be
		all tagged or all untagged (see “VLAN Port Configuration” on page 3-24).
		The Port Membership fields are displayed in six-port groups (for example, 1-6,
		7-12, 13-18). The number of ports displayed depends on the switch model or
		type of optional MDA installed in the Uplink Module slot.
		Default Value: U (All ports are assigned as untagged members of VLAN 1.)
		Range:	U, T, and -
304376-B Rev 00			3-23