Nortel Networks 350 manual Chapter Using the Console Interface

Installing the BayStack 350 Switch on a Flat Surface	..............................................2-3
Installing the BayStack 350 Switch in a Rack	2-5
Attaching Devices to the BayStack 350 Switch	2-8
Connecting the 10BASE-T/100BASE-TX Ports	2-9
Connecting the Console/Comm Port	2-10
Connecting Power	2-11
Verifying the Installation	2-13
Verifying the Installation Using the LEDs	2-14
Verifying the Installation Using the Self-Test Screen	2-15
Initial Setup of the BayStack 350 Switch	2-16
Chapter 3
Using the Console Interface
Accessing the CI Menus and Screens	3-1
Using the CI Menus and Screens	3-2
Navigating the CI Menus and Screens	3-2
Screen Fields and Descriptions	3-3
Main Menu	3-4
IP Configuration/Setup	3-7
Choosing a BootP Request Mode	3-9
BootP When Needed	3-10
BootP Always	3-10
BootP Disabled	3-11
BootP or Last Address	3-11
SNMP Configuration	3-12
System Characteristics	3-14
Switch Configuration	3-16
MAC Address Table	3-18
VLAN Configuration Menu	3-20
VLAN Configuration	3-22
VLAN Port Configuration	3-24
VLAN Display by Port	3-27
Traffic Class Configuration	3-28
Port Configuration	3-30
High Speed Flow Control Configuration	3-32
Choosing a High Speed Flow Control Mode	3-34

304376-B Rev 00 ix