Nortel Networks 350 manual Verifying the Installation Using the Self-Test Screen

Installing the BayStack 350 Switch

Verifying the Installation Using the Self-Test Screen

If a monitor is connected to the switch (see “ Connecting the Console/Comm Port” on page 2-10), you can observe the BayStack 350 switch Self-Test screen (Figure 2-10).

The results of the self-test are displayed briefly (5 or 10 seconds) in the Self-Test screen, which is followed by the Bay Networks logo screen (Figure 2-11).

Note: The Self-Test screen remains displayed only if the self-test detects a fatal error.

BayStack 350 Self-Test
CPU RAM test	... Pass
ASIC addressing test	... Pass
ASIC buffer RAM test	... Pass

Port internal loopback test ... Pass

Self-test complete.

Figure 2-10. BayStack 350 Switch Self-Test Screen

304376-B Rev 00 2-15