Nortel Networks 350 manual High Speed Flow Control Configuration Screen Fields

Using the Console Interface

High Speed Flow Control Configuration

Autonegotiation:	[ Enabled	]
Flow Control:	[ Disabled	]
Preferred Phy	[ Right ]
Active Phy	None

Use space bar to display choices, press <Return> or <Enter> to select choice. Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-15. High Speed Flow Control Configuration Screen

Table 3-13 describes the High Speed Flow Control Configuration screen fields.

Table 3-13. High Speed Flow Control Configuration Screen Fields

Field	Description
Autonegotiation	When enabled, the port advertises support for 1000 Mb/s operation, in
	full-duplex mode.
	Default Value:	Enabled
	Range:	Enabled, Disabled
Flow Control	Allows you to control traffic and avoid congestion on the gigabit MDA port. Two
	modes are available (see “Choosing a High Speed Flow Control Mode” on
	page 3-34 for details about the two modes). Autonegotiation must be disabled
	for this port when using this feature.
	Default Value:	Disabled
	Range:	Disabled, Symmetric, Asymmetric
		(continued)
304376-B Rev 00		3-33