Nortel Networks 350 manual Snmp Configuration Screen

Using the BayStack 350 10/100/1000 Series Switch

SNMP Configuration

The SNMP Configuration screen (Figure 3-4) allows you to set or modify the SNMP configuration parameters.

Choose SNMP Configuration (or press m) from the main menu to open the SNMP Configuration screen.

SNMP Configuration

Read-Only Community String: [ public ]

Read-Write Community String: [ private ]

Trap #1 IP Address:	[ 0.0.0.0 ]
Community String:	[	]
Trap #2 IP Address:	[ 0.0.0.0 ]
Community String:	[	]
Trap #3 IP Address:	[ 0.0.0.0 ]
Community String:	[	]
Trap #4 IP Address:	[ 0.0.0.0 ]
Community String:	[	]
Authentication Trap:	[ Enabled		]
Link Up/Down Trap:	[ Enabled		]

Enter text, press <Return> or <Enter> when complete.

Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-4. SNMP Configuration Screen

3-12 304376-B Rev 00