Nortel Networks 350 manual Spanning Tree Port Configuration Screen 2

Using the BayStack 350 10/100/1000 Series Switch

		Spanning Tree Port Configuration
Port	Trunk	Participation	Priority	Path Cost	State
----	-----	-------------------	--------	---------	----------
15		[ Normal Learning ]	128	5	Forwarding
16		[ Normal Learning ]	128	5	Forwarding
17	1	[ Normal Learning ]	128	10	Forwarding
18		[ Normal Learning ]	128	10	Forwarding
19	4	[ Normal Learning ]	128	10	Forwarding
20	4	[ Normal Learning ]	128	10	Forwarding
21		[ Normal Learning ]	128	10	Forwarding
22	5	[ Normal Learning ]	128	10	Forwarding
23	5	[ Normal Learning ]	128	10	Forwarding
24		[ Normal Learning ]	128	10	Forwarding
25	2	[ Normal Learning ]	128	10	Forwarding
26	2	[ Normal Learning ]	128	10	Forwarding
27		[ Normal Learning ]	128	10	Forwarding
28		[ Normal Learning ]	128	10	Forwarding
All		[ Normal Learning ]

Press Ctrl-P to display choices for ports 1-14.

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-28. Spanning Tree Port Configuration Screen (2 of 2)

	Table 3-24 describes the Spanning Tree Port Configuration screen fields.
Table 3-24.	Spanning Tree Port Configuration Screen Fields
Field	Description
Port	Indicates the switch port numbers that correspond to the field settings in that row of the
	screen (for example, the field settings in row 2 apply to switch port 2). Note that the
	settings in the All row (bottom row) affect all switch ports.
Trunk	The read-only data displayed in this column indicates the trunks that correspond to the
	switch ports specified in the Trunk Members fields of the Trunk Configuration screen (see
	“MultiLink Trunk Configuration” on page 3-35).
	(continued)

3-62 304376-B Rev 00