Nortel Networks 350 manual Describes the System Characteristics screen fields

		Using the Console Interface
	Table 3-4 describes the System Characteristics screen fields.
Table 3-4.	System Characteristics Screen Fields
Field	Description
MAC Address	The MAC address of the BayStack 350 switch.
Reset Count	A read-only field that indicates the number of resets since the operational firmware
	was first loaded on the switch.
	Default Value:	1
	Range:	0 to 232 -1
Last Reset Type	A read-only field that indicates the last type of reset.
	Default Value:	Power Cycle
	Range:	Power Cycle, Software Download, Management Reset,
		Management Factory Reset
Power Status	A read-only field that indicates the current power source.
	Default Value:	Primary Power
sysDescr	A read-only field that specifies the hardware and software version.
sysObjectID	A read-only field that provides a unique identification of the switch, which contains the
	vendor’s private enterprise number.
sysUpTime	A read-only field that shows the length of time since the last reset. This field is
	updated when the screen is redisplayed.
sysServices	A read-only field that indicates the switch’s physical and data link layer functionality.
sysContact	The name and phone number of the person responsible for the switch.
	Default Value::	Zero-length string
	Range:	Any ASCII string of up to 56 printable characters*
sysName	A name that uniquely identifies the switch.
	Default Value::	Zero-length string
	Range:	Any ASCII string of up to 56 printable characters*
sysLocation	The physical location of the switch.
	Default Value:	Zero-length string
	Range:	Any ASCII string of up to 56 printable characters

*Although this field can be set to up to 255 characters from a Network Management Station (NMS), only 56 characters are displayed on the console terminal.

304376-B Rev 00 3-15