Nortel Networks 350 manual Describes the Switch Configuration Menu screen options

		Using the Console Interface
	Table 3-5 describes the Switch Configuration Menu screen options.
Table 3-5.	Switch Configuration Menu Screen Options
Option		Description
MAC Address Table		Displays the MAC Address Table screen (see “MAC Address Table” on
		page 3-18). This screen allows you to view all MAC addresses and
		their associated port or trunk that the switch has learned, or to search
		for a particular MAC address (to see if the switch has learned the
		address).
VLAN Configuration		Displays the VLAN Configuration Menu (see “VLAN Configuration
		Menu” on page 3-20). This menu provides the following options: VLAN
		Configuration, VLAN Port Configuration, VLAN Display by Port, Traffic
		Class Configuration, and Return to Switch Configuration Menu
		screen. This menu allows you to create and modify VLANs.
Port Configuration		Displays the Port Configuration screen (see “Port Configuration” on
		page 3-30). This screen allows you to configure a specific switch port
		or all switch ports.
High Speed Flow Control		This menu selection only appears when an optional gigabit MDA is
Configuration		installed in the Uplink Module slot. When the gigabit MDA is installed,
		selecting this option displays the High Speed Flow Control
		Configuration screen (see “High Speed Flow Control Configuration” on
		page 3-32).
MultiLink Trunk Configuration		Displays the MultiLink Trunk Configuration Menu (see “MultiLink Trunk
		Configuration” on page 3-35). This menu provides the following
		options: MultiLink Trunk Configuration, MultiLink Trunk Utilization, and
		Return to Switch Configuration Menu screen. This menu allows you to
		create and modify trunks, and to monitor the bandwidth utilization of
		configured trunks.
Port Mirroring Configuration		Displays the Port Mirroring Configuration screen (see “Port Mirroring
		Configuration” on page 3-41). This screen allows you to designate a
		single switch port as a traffic monitor for up to two specified ports or
		addresses.
Rate Limiting Configuration		Displays the Rate Limiting Configuration screen (see “Rate Limiting
		Configuration” on page 3-45). This screen allows you to limit the
		forwarding rate of broadcast and multicast packets.
IGMP Configuration		Displays the IGMP Configuration screen (see “IGMP Configuration” on
		page 3-48). This screen allows you to optimize multicast traffic by
		setting up IGMP port memberships that filter multicast on a per port
		basis (see “IGMP Snooping” on page 1-34 for more information about
		this feature).
		(continued)
304376-B Rev 00		3-17