Nortel Networks 350 manual Display Event Log, Event Log Screen

Using the BayStack 350 10/100/1000 Series Switch

Display Event Log

This section describes the various functions of the Event Log screen (Figure 3-32).

Note: This screen does not refresh dynamically to show new entries. To refresh the screen, press [Ctrl]-P.

Choose Display Event Log (or press e) from the main menu to open the Event Log screen.

	Event Log
Entry Number: 4	sysUpTime: 00:14:36	Reset Count: 2

Connection logout, IP address: 38.227.40.8, access mode: no security.

Entry Number: 3 sysUpTime: 00:13:35 Reset Count: 2

Connection logout, IP address: 38.227.40.8, access mode: no security.

Entry Number: 2 sysUpTime: 00:00:53 Reset Count: 2

Successful connection from IP address: 38.227.40.8, access mode: no security.

Entry Number: 1 sysUpTime: 00:00:00 Reset Count: 1 Software downloaded to BayStack Model 450-24T HW:RevA FW:V1.00 SW:V1.0.0.0

Press Ctrl-P to see previous display. Press Ctrl-N to see more entries. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-32. Event Log Screen

The Event Log screen provides the following information:

•Software download: Indicates the new software version.

•Authentication failure: Indicates any attempted SNMP get or set access that specified an invalid community string.

3-74 304376-B Rev 00