Nortel Networks 350 manual MultiLink Trunk Configuration Screen

Using the Console Interface

				MultiLink Trunk Configuration
Trunk		Trunk Members				STP Learning		Trunk Mode	Trunk Status
----- ----------------------------						------------		---------------	------------
1	[ 6	][ 7	][ 9	][ 17	]	[ Normal	]	Basic	[ Enabled	]
2	[ 25	][ 26	][	][	]	[ Normal	]	Basic	[ Enabled	]
3	[ 13	][ 14	][	][	]	[ Normal	]	Basic	[ Enabled	]
4	[ 19	][ 20	][	][	]	[ Normal	]	Basic	[ Enabled	]
5	[ 22	][ 23	][	][	]	[ Fast	]	Basic	[ Enabled	]
6	[	][	][	][	]	[ Disabled ]		Basic	[ Disabled ]
Trunk		Trunk Name

------------------------

1 [ S1:T1 to FS2 ]

2 [ S1:T2 to S2 ]

3 [ S1:T3 to S2 ]

4 [ S1:T4 to S3 ]

5 [ S1:T5 to S4 ]

6 [ Trunk #6 ]

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-17. MultiLink Trunk Configuration Screen

	Table 3-15 describes the MultiLink Trunk Configuration screen fields.
Table 3-15.	MultiLink Trunk Configuration Screen Fields
Field	Description
Trunk	Column header for the read-only fields in this screen. The read-only data displayed in the
	Trunk column indicates the trunk (1 to 6) that corresponds to the switch ports specified in
	the user-configurable Trunk Members fields.

Trunk Members The Trunk Members column contains fields in each row that can be configured to create the corresponding trunk. Each switch port can only be a member of a single trunk. The appropriate trunk number for each trunk member configured within this field is shown adjacent to the corresponding switch port in the following screens: Port Configuration screen, and Spanning Tree Configuration screen. Gigabit ports cannot be configured as trunk members.

Default Value:	blank field
Range:	1 to 28 (depending on model type)
	(continued)
304376-B Rev 00	3-37