Nortel Networks 350 manual Self-Test Screen After Resetting the Switch

Using the Console Interface

Reset

The Reset option (accessed from the main menu) allows you to reset the BayStack 350 switch without erasing any configured switch parameters.

Resetting the switch takes approximately 5 seconds to complete. During this time, the switch initiates a self-test that comprises various diagnostic routines and subtests. The LEDs display various patterns to indicate that the subtests are in progress.

The results of the self-test are displayed briefly (5 or 10 seconds) in the Self-Test screen (Figure 3-36), which is followed by the Bay Networks logo screen (Figure 3-37).

Note: The Self-Test screen remains displayed only if the self-test detects a fatal error.

BayStack 350-24T Self-Test
CPU RAM test	... Pass
ASIC addressing test	... Pass
ASIC buffer RAM test	... Pass
Port internal loopback test	... Pass
Self-test complete.

Figure 3-36. Self-Test Screen After Resetting the Switch

304376-B Rev 00 3-77