Nortel Networks manual Using the BayStack 350 10/100/1000 Series Switch

Using the BayStack 350 10/100/1000 Series Switch

The Reset to Default Settings option takes approximately 5 seconds to complete. During this time, the switch initiates a self-test that comprises various diagnostic routines and subtests. The LEDs display various patterns to indicate that the subtests are in progress.

The results of the self-test are displayed briefly (5 or 10 seconds) in the Self-Test screen (Figure 3-38), which is followed by the Bay Networks logo screen (Figure 3-39).

.

BayStack 350-24T Self-Test
CPU RAM test	... Pass
ASIC addressing test	... Pass
ASIC buffer RAM test	... Pass
Port internal loopback test	... Pass
Self-test complete.

Figure 3-38. Self-Test Screen After Resetting to Factory Default Settings

3-80 304376-B Rev 00