Using the Console Interface

Table 3-22. Console/Comm Port Configuration Screen Fields (continued)

FieldDescription

Attenzione: Nel caso in cui si scelga una velocità di trasmissione non corrispondente a quella del terminale della console, la comunicazione con l'interfaccia della console cadrà premendo il tasto [Invio]. Se la comunicazione cade, impostare il terminale della console in modo tale che corrisponda alla nuova impostazione della porta di servizio.

Console Password Enables password protection for accessing the console interface (CI) through a TELNET session, a console terminal, or both.

If you set this field to Required, you can use the Logout option to restrict access to the CI. Thereafter, you will need to specify the correct password at the console-terminal prompt. See Console Read-Only Password and Console Read-Write Password for more information.

Default Value:

Not Required

Range:

Not Required, Required for TELNET, Required for Console,

 

Required for Both

Console Read-OnlyWhen the Console Password field is set to Required (for TELNET, for Console, or

Passwordfor Both), this field allows read-only password access to the CI. Users can access the CI using the correct password (see Default Value:), but cannot change any parameters or use the Reset option or Reset to Default option.

Default Value: user

Range:

An ASCII string of up to 15 printable characters

(continued)

304376-B Rev 00

3-57

Page 169
Image 169
Nortel Networks 350 manual Required for Both