Nortel Networks manual Using the BayStack 350 10/100/1000 Series Switch

Using the BayStack 350 10/100/1000 Series Switch

#Caution

#Omitting a Forward slash (/) when the entry is continued to the next

#line, can cause the interruption of the booting process or the

#incorrect image file to download. Always include forward slashes

#where needed.

#

#Important Note:

#If a leading zero (0) is used in the IP address it is calculated as an

#octal number. If the leading character is "x" (upper or lower case),

#it is calculated as a hexadecimal number. For example, if an IP address

#with a base 10 number of 45 is written as .045 in the BOOTPTAB.TXT file,

#the Bootp protocol assigns .037 to the client.

#

#Global entries are defined that specify the parameters used by every device.

#Note that hardware type (ht) is specified first in the global entry.

#

#The following global entry is defined for an Ethernet device. Note that this

#is where a client's subnet mask (sm) and default gateway (gw) are defined.

global1/

ht=ethernet/

hd=c:\opt\images/

sm=255.255.255.0/

gw=192.0.1.0

#The following sample entry describes a BootP client:

bay1ht=ethernetha=0060fd000000ip=192.0.0.1hd=c:\ezlan\imagesbf=b350_100.img

# Where:
#	host name:	bay1
#	hardware type:	Ethernet
#	MAC address:	00-60-FD-00-00-00
#	IP address:	192.0.0.1

#home directory of boot file: c:\ezlan\images

# boot file: b350_100.img

F-2 304376-B Rev 00