Nortel Networks 350 manual IP Configuration/Setup, Option Description, Logout

Using the Console Interface

Table 3-1.	Console Interface Main Menu Options (continued)
Option	Description
	When you select this option, the switch resets, runs a self-test, then displays the
	Bay Networks logo screen. Press [Ctrl]-Y to access the BayStack 350 Main
	Menu.
Logout	The Logout option allows a user in a TELNET session or a user working at a
	password-protected console terminal to terminate the session (see “Logout” on
	page 3-82).

IP Configuration/Setup

The IP Configuration/Setup screen (Figure 3-3) allows you to set or modify the BayStack 350 switch IP configuration parameters. Data that you enter in the user-configurable fields takes effect as soon as you press Enter.

To open the IP Configuration/Setup screen, choose IP Configuration/Setup (or press i) from the main menu.

Note: The read-only fields in this screen are updated based on the BootP mode specified in the BootP Request Mode field. (See “ Choosing a BootP Request Mode” on page 3-9 for more information.)

304376-B Rev 00 3-7