Nortel Networks 350 manual Select IP Configuration/Setup or press i from the Main Menu

Installing the BayStack 350 Switch

The BayStack 350 switch is designed for plug-and-play operation; however, certain parameters must be configured for the switch management function to become fully operational. A minimal configuration is required when you plan on remote management or TFTP operations.

In that case, you need to enter the IP address of the switch, the subnet mask, and the gateway address (refer to Chapter 3, “Using the Console Interface” for more information about configuring your BayStack 350 switch).

To set the IP address, subnet mask, and gateway address for the switch, follow these steps:

1.Apply power to the switch.

2.After the Self-Test screen displays, press [Ctrl]-Y.

The Main Menu is displayed (Figure 2-12). The Main Menu hierarchy is described in “Chapter 3, “Using the Console Interface.”

BayStack 350-24T Main Menu

IP Configuration/Setup...

SNMP Configuration...

System Characteristics...

Switch Configuration...

Console/Comm Port Configuration...

Spanning Tree Configuration...

TELNET Configuration...

Software Download...

Display Event Log

Reset

Reset to Default Settings

Logout

Use arrow keys to highlight option, press <Return> or <Enter> to select option.

Figure 2-12. Main Menu

3.Select IP Configuration/Setup (or press i) from the Main Menu.

304376-B Rev 00 2-17