Installing the BayStack 350 Switch

1

2

1 = Flush with rack

2 = Extended from rack

BS35036A

Figure 2-3. Attaching Mounting Brackets

3.Position the switch in the rack and align the holes in the mounting bracket with the holes in the rack (see Figure 2-4).

4.Insert two screws, appropriate for your 19-inch rack, into each of the mounting brackets and tighten.

BS35037A

Figure 2-4. Installing the BayStack 350 Switch in an Equipment Rack

5.After the switch is secured in the rack, proceed to the next section, “ Attaching Devices to the BayStack 350 Switch” on page 2-8.

304376-B Rev 00

2-7

Page 99
Image 99
Nortel Networks 350 manual Attaching Mounting Brackets